Absco Industries
Assembly Instruction Manual
ABSCO SIGNATURE PATIO
MODEL: ADPATIO6030
6.12m W x 3.11m D x up to 3.18m H
Model: ADPATIO6030
21/09/23
1.0
8
FITTING THE SHURELOCK BEAM
NOTE: Beam orientation is important to prevent
water entry.
Orientate the beam so the exterior face has the
overlap to the top.
1.
Remove the protective plastic coating from
the outside of the beam.
2.
Safely lift and place a
SB2
beam inside the
post brackets
BK3
as shown.
Overlap to
top
Overlap to
bottom
INTERIOR
EXTERIOR
CL
2.
Make sure the ends of the beam are all the
way into the brackets and fasten each end with
four
FAST100
tek screws.
These are visible screws so take time to position
them on the centreline of the BK3 bracket and
space accordingly.
*Fit this tek below the gutter after it is attached
later.
*