ABS P.RIDE, Manual

Page: 64 / 144

64 English
Warning!
The top LED always shows system status, the bottom LED is only used for
group activation and is blue.
System check
The system check runs when the handle is switched on. The colour
functions (red, green, blue) of the two LEDs are checked and the system
shows the battery charge status.
Example
The colour functions of the two LEDs are checked first. First the top LED
and then the bottom LED light up red, then top green, bottom green, then
top blue, bottom blue.
Once the LED check has been completed successfully, the system shows
the battery charge status. If the LED remains green continuously for 7
seconds, charge status = 100%.
If the system check has been successful and your system is ready for use,
the top LED flashes green every 3 seconds.
If the function key was pressed during the battery check, the system will
try and find a group. The bottom LED lights up blue during this time. If
it has found a group, the system indicates that you are in a group by mak-
ing the bottom LED flash blue rapidly. If this is completed successfully,
the top and bottom LEDs flash green/blue.
Operating mode
Once the system check has been completed successfully, the top LED
flashes green every 3 seconds until you move the handle into the OFF
position.
16. LED SYSTEM CHECK