ABS P.RIDE, Manual

Page: 53 / 144

53 English
11-C LUFTABLASSEN
QUICKSTART - ILLUSTRATIONEN
INSERT
CARTRIDGE
1
ACTIVATE HANDLE
2
SYSTEM CHECK
3
PULL HANDLE IN
EMERGENCY
4
DEFLATE TWINBAGS
5
STORE AIRBAGS
6
ZIPPER TO
STARTING POSITION
7
CLOSE
QUICKBURST ZIPPER
8
CLOSE
QUICKBURST ZIPPER
9
QUICKSTART - ILLUSTRATIONEN
INSERT
CARTRIDGE
1
ACTIVATE HANDLE
2
SYSTEM CHECK
3
PULL HANDLE IN
EMERGENCY
4
DEFLATE TWINBAGS
5
STORE AIRBAGS
6
ZIPPER TO
STARTING POSITION
7
CLOSE
QUICKBURST ZIPPER
8
CLOSE
QUICKBURST ZIPPER
9
QUICKSTART - ILLUSTRATIONEN
INSERT
CARTRIDGE
1
ACTIVATE HANDLE
2
SYSTEM CHECK
3
PULL HANDLE IN
EMERGENCY
4
DEFLATE TWINBAGS
5
STORE AIRBAGS
6
ZIPPER TO
STARTING POSITION
7
CLOSE
QUICKBURST ZIPPER
8
CLOSE
QUICKBURST ZIPPER
9
Important: Close the inside sections again once the
airbags are completely empty (snow protection).
STEP 2
Folding airbags
Open the zip fastening on
the airbag compartment
completely so that the
zip is only running on one
side of the fastening. Push
the zip all the way up and
reconnect the ends of the
fastening.
Stuff the airbags into
the respective airbag
compartment. Don´t roll
or fold the airbags.
Close the zip all the way
along the quick-burst
area.
Close the flap across
the quick-burst area
and across the start of
the zip at the top of the
backpack the quick-burst
area may be left slightly
open.
STEP 3
Replace ABS
®
P.RIDE inflator.
The ABS ® P.RIDE inflator must be replaced by your
local dealer after activation