ABS P.RIDE, Manual

Page: 51 / 144

51 English
04 TRAININGSAUSLÖSUNG
Move the handle into the OFF position and wait until
the LEDs have stopped flashing. Then remove the
inflator from the control module (see Step 9) and
move the handle into the ON position. The top LED
now flashes red and white (training mode). Pull the
activation handle.
The required activation force is approx. 6 kg (60 N).
The airbags will not inflate; only the tensile force is
simulated. If test activation was successful, the top
LED lights up white for 3 seconds and then returns to
flashing red.
4.2 BEFORE EVERY TOUR OR USE
Carry out the following steps before every tour:
1 Activate the activation handle (turn to ON)
2 Carry out test activation
3 Deactivate the activation handle (turn to OFF
position)
4 Check inflator weight
5 Insert ABS
® inflator
6 Attach straps and belts
7 Activate the activation handle (turn to ON)
8 Check system is functional (green LED)
4.3 AT THE END OF THE TOUR
Turn the activation handle to the OFF position and
store it on the shoulder strap. You can leave the inflator
inserted.