61
Overview of the radio modules used
Overview of the radio modules used
Module
Band
Frequency
Frequency range
Subclass of Class 1
3
accord-
ing to Commission decision
2000/299/EC
Transmitting
power
RFID
13.56 MHz
13.553 – 13.567 MHz
116 (Spectral mask: I.2)
< 10 mW
LTE
FDD LTE
B1
2100 MHz
1920 – 1980 MHz
9 a
< 200 mW
B3
1800 MHz
1710 - 1785 MHz
B7
2600 MHz
2500 – 2570 MHz
B8
900 MHz
880 – 915 MHz
B20
800 MHz
832 – 862 MHz
B28
700 MHz
703 – 748 MHz
UMTS/HSPA/
HSPA+
B1
2100 MHz
1920 – 1980 MHz
< 250 mW
B8
900 MHz
880 – 915 MHz
GSM/EDGE/
GPRS
900 MHz
880 – 915 MHz
< 2000 mW
1800 MHz
1710 – 1785 MHz
WLAN
2400 MHz
2400 – 2483.5 MHz
22
< 100 mW
Trademarks
All trademarks mentioned in this manual, including those that may be protected by third parties are, without restriction, subject to the
regulations of the respectively applicable trademark law and the property rights of the respective registered owners. All trademarks,
trading names or company names marked here as such are, or may be, trademarks or registered trademarks of their respective owners.
All rights not explicitly granted here are reserved.
The absence of explicit identification of trademarks used in this manual must not lead to the conclusion that a name is free from the
rights of third parties.
Data cable recommendations
A shielded data cable of the following type is recommended for wiring up the LAN interface in the Wallbox eM4 Single:
Designation
Cross section
Number
Cat5e S-FTP
from at least 0.14 mm²
1 cable each for the connection between a wallbox and a LAN port
on the local router or switch
Cat6 S-FTP
ATTENTION
Selecting suitable data cables
Please note that these are recommendations only: the conductor cross-section must be adjusted according to the cable length and
the ambient conditions by the specialist electrical contractor responsible for installation.
