37
Setting up communication via the ABL Configuration App
NOTE
Access to the app’s help system
You can access the app’s help system via the button, which is displayed in the top right of this screen.
Controller wallbox
x
Use the
Reset to factory settings
option to reset all of the wallbox’s parameters to the factory default. You can then start a
new configuration (see below).
x
The
Support
Extender Wallbox
x
4
In the next step, select the desired mode:
J
Start new configuration:
Tap this option to perform a
new configuration for the operating modes
Controller /
Extender
or
Extender as standalone
(see
Step 5
onwards).
J
Existing configuration:
Tap this option to change the
parameters of a previously created configuration in the
Control Board
. You can find further information starting
on page 40.
5
To start a new configuration, select the desired operating
mode for your new configuration.
J
Tap
Controller / Extender
to set up a Controller and
associated Extender wallboxes to operate together in a
charging group and more. You can find further information
on page 39.
J
Tap
Extender as standalone
to set up an Extender
wallbox for standalone operation without a Controller and
backend connection. You can find further information on
6
You can now establish a local wireless connection between
the mobile device and the wallbox as follows:
J
Tap
OK
to scan the serial number on the rating plate of the
wallbox with the camera.
J
Alternatively, tap the
Enter serial number manually
option and enter it.
