60 Appendix
Product number
100000157
Maximum elevation
≤ 2,000 m AMSL
Dimensions (H × W × D)
516 × 306.5 × 145 mm (W: 290 mm without protrusions)
Weight per wallbox
Approx. 7.2 kg
The eM4 Single Controller and eM4 Single Extender wallboxes are also available as variants with shutter charging sockets as well
as reev ready versions for operation with the backend solutions from reev. The corresponding product numbers can be found in the
following table:
Controller with shutter
100000153
4WS-22CNH2
Controller reev ready
100000200
4WS-22CNS2
Controller reev ready with shutter
100000204
4WS-22CNH2
Extender with shutter
100000159
4WS-22EEH2
Extender reev ready
100000201
4WS-22ENS2
Extender reev ready with shutter
100000205
4WS-22EEH2
Visit the product page of the Wallbox eM4:
https://www.ablmobility.de/en/products/em4.php
Standards and guidelines
General standards
2014/30/EU
EMC Guideline
2011/65/EU
RoHS Guideline
2012/19/EU
WEEE Directive
2014/35/EU
Low voltage directive
2014/53/EU
Radio Equipment Directive
Standards governing electromagnetic interference (EMV)
IEC 61851-21-2
Conductive charging systems for electric vehicles – Part 21-2: EMC requirements for off board elec-
tric vehicle charging systems
Device safety standards
IEC 61851-1 Ed. 3
Electrical equipment for electric road vehicles - conductive charging systems for electric vehicles –
Part 1: General requirements
IEC 60364-7-722 Ed. 1
Low voltage installations - Part 7-722: Requirements for special installations or locations - Supply of
electric vehicles
IEC 61439-7:2020
Switchgear combinations for specific applications such as marinas, campsites, marketplaces, charg-
ing stations for electric vehicles
IEC 62955
Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles
