13
How the HMI works
Authorisation required
If the charging operation has to be enabled using an RFID card, a
blue chase light is shown dynamically on the status indicator.
Charging process active
After a request by the vehicle, the charging operation in progress
is displayed dynamically via the blue status indicator.
Charging process interrupted or completed
If the charging process has been completed or interrupted by the
vehicle or the load management, the status indicator lights up
static blue.
RFID card recognised
If the RFID card has been recognised by the RFID reader, the
wallbox emits a short sound signal.
RFID card authorisation successful
If the RFID card has been successfully authorised, the wallbox
emits two short sound signals.
RFID card authorisation rejected
If the authorisation of an RFID card has failed, the status indica-
tor lights up orange on both sides. In addition, the wallbox emits
three long sound signals.
NOTE
Compatibility with RFID transponders
The Wallbox eM4 Single supports the following RFID transponders: Mifare Classic, Mifare mini, Mifare DESFIRE EV1, Mifare Plus
S/X, Mifare Pro X, Mifare SmartMX, Mifare Ultralight, Mifare Ultralight C, SLE44R35, SLE66Rxx (my-d move), Legic Advant, Pay
Pass, Pico Pass.
To ensure the compatibility of the RFID transponder, it should be tested with the Wallbox eM4 Single. Besides the RFID standard
used, other factors (such as the dimensions of the transponder) also influence compatibility. If you need support with testing an RFID
transponder, contact
ABL Customer Service
Software reset performed
When you restart the wallbox using the reset button (see “Reset-
ting the wallbox and restoring to factory settings” on page 54),
selected LEDs on the status display will light up orange. In
addition, the wallbox emits four long sound signals.
Factory reset performed
When you reset the wallbox to factory settings using the
reset button or the help system of the ABL Configuration App
(see “Resetting the wallbox and restoring to factory settings”
on page 54), the status indicator will light up orange continu-
ously. In addition, the wallbox emits six long sound signals.
Malfunction
If an error has occurred during operation, the status indicator
pulses red.
