| Installation –
Installing the eMH2 Wallbox on the POLEMH2
24
8
Insert the supply cable through the large grommet
into the housing of the mounting pole and hang the
wallbox on the two screws on the mounting pole.
9
Use the two supplied M6×16 cylinder-head screws
and the hexagon screwdriver to screw the wallbox
into the two lower fixing points.
10
Hook the housing cover onto the upper edge of the
housing base and lock it using the housing cover
key.
11
Switch to the rear of the opened mounting pole and
pull the supply cable of the wallbox to the terminal
block of the upper top-hat rail.
This completes the installation of the wallbox on the mounting pole. Go to the section “Electrical connection in the
