Installation –
Installing the eMH1 Wallbox on the POLEMH1 |
19
In addition, you will need the following tools
Torx screwdriver
Hexagon screwdriver
Phillips screwdriver
Utility knife
Stripping tool
Voltage tester
NOTE
Additional tools for installing the wallbox
Additional accessories and tools are required for the installation and start-up of the respective wallbox. You can
find further information in the corresponding installation instructions.
Installing the eMH1 Wallbox on the POLEMH1
This section describes how to install the eMH1 Wallbox on the POLEMH1. If using an optional WHEMH10 or 1W0001
mounting plate, please refer to the instructions for mounting plates.
Proceed as follows:
1
Open the housing cover of the wallbox using the
key supplied and flip it up.
2
Loosen the four screws of the upper part of the
housing using the Phillips head screwdriver.
y
Keep the four screws in a safe place.
