| Dimensional drawings and dimensions –
POLEMH1
8
Dimensional drawings and dimensions
The dimensions and mounting points of the POLEMHx as well as the optional EMH9999 foundation are shown in the
following dimensional drawings.
POLEMH1
Mounting pole for installing an eMH1 Wallbox, front, side and rear view as well as view from below
(all dimensions in mm)
Detailed view of the front
A
E
D
B
C
C
A
These three thread points are used for directly mounting the eMH1 Wallbox on
the POLEMH1.
B
These two thread points are used for directly mounting the WPR12 weather
shield on the POLEMH1 (see “Accessories” on page 13).
C
These six thread points are used for directly mounting a WHEMH10 or 1W0001
mounting plate on the POLEMH1 (see “Accessories” on page 13).
The eMH1 Wallbox is then screwed to the mounting plate.
D
The supply cable (right) and any data cables (left) are inserted into the eMH1
Wallbox via these two openings.
E
These two thread points are used for directly mounting a CABHOLD cable holder
on the POLEMH1 (see “Accessories” on page 13).
1647
280
60 90
180
1607
40
200
508
310
298
120
150
280
150
50
35
95
210
13,5
23
Front
