Introduction to the POLEMHx –
Accessories |
13
WARNING!
Storing the original packaging
Keep the original packaging in a safe place. In the event of damage that cannot be repaired on site, the mount-
ing pole may have to be dismantled and sent in for repair. The following requirements must be met for proper
shipping:
The mounting pole must be protected from mechanical damage during transport by means of the original
packaging or other packaging.
To ensure safe shipping, fixed transport on a pallet is recommended.
Accessories
The following accessories for the POLEMHx mounting poles are available separately:
EMH9999
Precast concrete foundation for installing the mounting pole POLEMHx
h = 650 mm, w = 430 mm, d = 190 mm
WPR12
Weather shield for installation on an exterior wall or the mounting poles
POLEMH1 and POLEMH2
h = 142 mm, w = 395 mm, d = 225 mm
WPR36
Weather shield for installation on an exterior wall or the mounting pole
POLEMH3
h = 142 mm, w = 515 mm, d = 285 mm
CABHOLD
Cable holder with charging plug receptacle for installation on an exterior wall or
the mounting poles POLEMH1/2/3
h = 187 mm, w = 76 mm, d = 105 mm
You can find further information on
ABL
charging stations and accessories at
.
