BAL.0212.0 • 2018-07-16
EN - 15
PP
8 Maintenance and cleaning
8.1 Replacing the wire feed roll
Fig. 6 Feeding in the wire on page EN-12
1
Lift off clamping cap
and swing out seat clamp
2
Lift off the flat-head screw
using the crosstip screwdriver and lift it off together with the
3
Pull wire feed roll off the seat and replace it.
4
Swing in seat clamp
and attach clamping cap
WARNING
Risk of burns
The welding torches reach very high temperatures during welding.
• Allow the welding torches to cool down.
• Wear the correct protective gloves.
NOTICE
• The specified maintenance intervals are guidance values and refer to single-shift
operation.
• Maintenance and cleaning work may only be carried out by qualified personnel (in
Germany see TRBS 1203).
• Check the coolant hoses, seals and connectors for damage or leaks and replace if
necessary.
• Always wear your personal protective equipment when performing maintenance and
cleaning work.
• Remove any adhering weld spatter.
• Ensure that all threaded fittings are tight.
NOTICE
• Required tools, crosstip screwdriver.
• Make sure that the wire feed roll complies with the diameter of the inserted wire
electrode.
NOTICE
• Ensure tight fit of the wire feed roll in the seat.
