Do it your way
1
SOLDERING IRON/BLOW TORCH
- BUTANE
Part Numbers: 207012 & 207023
INSTRUCTION MANUAL
PLEASE NOTE: TORCH IS SUPPLIED EMPTY; FILLING WILL BE REQUIRED PRIOR TO USE. WE RECOMMEND
COMMAND GAS BUTANE GAS REFILL 200G, PART NUMBER 207078.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS AND WARNINGS MAY RESULT IN DAMAGE TO PROPERTY,
SERIOUS PERSONAL INJURY OR DEATH.
THE BUTANE SOLDERING IRON/BLOW TORCH HAS
ADJUSTABLE TEMPERATURE CONTROL WHICH
ALLOWS YOU TO TACKLE A VARIETY OF TASKS IN
AND AROUND THE HOME OR WORKPLACE. EASY TO
OPERATE, AND BEING FULLY PORTABLE MAKES THE
COMMAND GAS SOLDERING IRON/BLOW TORCH THE
IDEAL CHOICE FOR SOLDERING, HEATING, SHRINKING,
CUTTING AND MELTING APPLICATIONS. COMES
COMPLETE WITH ALL THE TIPS AND ACCESSORIES YOU
WILL REQUIRE.
PARTS
1.
Gas refilling valve
2.
Fuel Storage Tank
3.
Gas/flame Adjustment Slide
4.
Continuous Flame Switch
5.
Stand
6.
Lock Collar
7.
Blow Torch
8.
Soldering Base
9.
Soldering tip
10.
Exhaust vent
11.
Flame Off Button
12.
Ignition lock switch (Child Resistant Feature
13.
Piezo ignition Button
FEATURES
Heats up to 1300°C
Adjustable flame control
Quick heat up
Piezo ignition
Built in stand
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
FILLING/REFILLING GAS
Ensure the gas/flame adjustment slide is in the “1” position
(off) and torch has cooled down naturally before refilling with
gas.
Hold the torch in an upside down position.
Insert the butane cartridge refill nozzle into the refilling valve
and push down.
Stop refilling when the gas starts to overflow. Do not overfill.
The soldering Iron/blow torch should never be completely
filled, overfilling could cause the flame to spit.
TO IGNITE
Move the gas/flame adjustment slide to the mid position
between numbers 2 and 3.
Holding the soldering Iron In your hand, use your thumb to
press down on the ignition lock switch and at the same time
push the piezo ignition button in a downwards direction
For a constant flame, before releasing the piezo ignition
button, use your Index finger to slide the continuous flame
switch to the left.
Adjust flame level with the gas/flame adjustment slide.
a.
Move towards position “4” to increase
b.
Move towards position “1” to decrease
TO EXTINGUISH
The soldering Iron/blow torch Is fitted with a flame off button,
pressing this will temporarily stop the gas flow, but remember
the soldering assembly will still be extremely hot.
To turn the soldering Iron off, move the continuous flame
switch to the right and then move the gas/flame adjustment
slide to the “1” position. This will cut off the gas supply and
extinguish the soldering iron.
