Do it your way
2
HOT AIR
Unscrew the soldering tip (counter clockwise) from the
soldering base.
TIPS
You may install various tips onto the hot blower assembly
for different operations, if you haven’t purchased the kit
(Command gas part No. 207023) and require additional tips,
you can purchase Part No. 208045 4 pce tip set which will
provide you with various tips for a variety of tasks.
CAUTION: Please only assemble the parts if the tool is cold or
after soldering iron has cooled down.
WARNING
To avoid injury or damage only ignite the torch when clear
of face, hand, clothing or combustible materials
The burner becomes extremely hot during and after
operation.
Care must be taken to avoid accidental burns.
Ensure the flame is completely out after use.
Protect from direct sunlight. Do not expose to temperature
above 50°C/120°F.
Contains flammable gas under pressure. Do not
disassemble, puncture, or incinerate after use
Keep out of reach of children
SAVE THESE INSTRUCTIONS
DO NOT DISCARD THESE WARNINGS AND
INSTRUCTIONS
DISTRIBUTED BY
TRADEPEM INDUSTRIAL PTY LTD
WWW.COMMANDTOOLS.COM.AU
