BAL.0212.0 • 2018-07-16
EN - 3
PP
1 Identification
1 Identification
The push-pull welding torches of the "PP" series guarantee constant and thus problem-free wire
feeding. This version is used predominantly for welding aluminium, for thin wires and for long
cable assemblies. They conform to EN 60 974-7 and are not considered devices having their
own functions. Arc welding can only be carried out in connection with a welding power supply.
These operating instructions only describe PP welding torches. PP welding torches may only be
operated using original
ABICOR BINZEL
spare parts.
1.1 Marking
This product fulfills the requirements that apply to the market to which it has been introduced. A
corresponding marking has been affixed to the product, if required.
2 Safety
The enclosed safety instructions must be observed.
2.1 Designated use
• The device described in these instructions may be used only for the purpose described in
these instructions in the manner described. In doing so, observe the operating, maintenance
and servicing conditions.
• Any other use is considered contrary to the designated use.
• Unauthorized conversions or power increase modifications are not allowed.
2.2 Classification of the warnings
The warning signs used in the operating instructions are divided into four different levels and are
shown prior to potentially dangerous work steps. Arranged in descending order of importance,
they have the following meaning:
DANGER
Describes an imminent threatening danger. If not avoided, this will result in fatal or extremely
critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, this may result in serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, this may result in slight or
minor injuries.
