ABI-CAR E-1200 / E-1200-O
BAL.0647.0 • 2018-08-24
EN - 15
The welding tractor is delivered partially pre-assembled. The connector cable has no connector on one side. The customer
must attach the plug for the wire feeder. Connect the welding tractor as shown in the following illustration:
6.1 Preparation
1
Hold the welding tractor by the handle to transport it to the desired work area.
2
Ensure that all buttons and switches on the welding tractor are in the 0 and/or Stop or Off position.
NOTICE
• Note the following instructions:
3 Product description on page EN-9
• The system may be installed and put into operation only by trained specialists.
1
Wire feeder
2
Welding power source
3
Power supply
4
ABI-CAR E-1200 / E-1200-O welding tractor
5
Welding torch
Fig. 6
Connection setup (system illustration) for ABI-CAR E-1200
1
Wire feeder
2
Welding power source
3
Power supply
4
ABI-CAR E-1200-O
welding tractor
5
Welding torch
Fig. 7
Connection setup (system illustration) for ABI-CAR E-1200-O
1
2
5
3
4
1
2
5
3
4
