ABI-CAR E-1200 / E-1200-O
BAL.0647.0 • 2018-08-24
EN - 21
7.1 Control elements
DANGER
Risk of fire
If the welding tractor is operated without a heat shield, it can become significantly damaged or even catch fire because of
the heat resulting from the welding process.
• Never operate the welding tractor without a heat shield and ensure that it is mounted properly before each use.
NOTICE
• It may be operated only by trained specialists.
• Ensure that all required parameters, for example welding current, wire feeder, etc., have been set at the welding power
source according to your welding task.
1
Speed
display
2
Direction of motion
switch
(left/center/right/stop)
3
Welding mode selection
switch
4
Speed
knob
Fig. 15
Control elements 1200
Pos.
Designation
Function
Speed display
Display of the welding tractor speed preset on the potentiometer
Direction of motion left/
center/right/stop
switch
Selection of desired direction of motion of welding tractor
• Left = move left
• Center = OFF
• Right = move right
Welding mode selection
switch
Selection of desired welding function
• Down = welding ON
• Center = welding OFF
• Up = end crater filler function (touch function)
Speed
knob
Turning the knob for selection of the desired speed of the welding tractor:
• Turn to the right = increase speed
• Turn to the left = decrease speed
1
2
3
4
