Abicor Binzel ABI-CAR E-1200, Operating Instruction, Page: 49 / 68

ABI-CAR E-1200 / E-1200-O
BAL.0647.0 • 2018-08-24
EN - 17
6.3 Adjusting the cross slide
1
Loosen the screws
(1)
.
2 Adjust the mount (5) .
3
Insert the screws
(1)
to select the required position
(3)
or
(4)
and tighten them.
NOTICE
• Set the cross slide to match the type and geometry of the welding torch in use.
• The position of the welding torch can be changed vertically (2) and horizontally (6) during the welding process by
adjusting the cross slide.
1 Screws (2 pcs.)
2 Adjusting screw for vertical position
3 Two bores for adjusting to position 2
4 Two bores for adjusting to position 3
5 Mount
6 Adjusting screw for horizontal position
Fig. 10
Adjusting the cross slide
1 3
4
6
2
5