ABI-CAR E-1200 / E-1200-O
BAL.0647.0 • 2018-08-24
EN - 9
3 Product description
3.1 Technical data
DANGER
Risk of injury due to falling welding tractor
There is a risk of extremely critical injuries if the welding tractor falls once it reaches the end of a workpiece or if it is
operated on inclined or vertical surfaces.
• Never operate the welding tractor unattended.
• Stop the welding tractor at the edge just before it reaches the end of the workpiece. To do so, press the
STOP button
• Operation of the welding tractor on inclined or vertical surfaces is permitted only with a guide rail system, which can
be purchased separately. A safety device to prevent falling must also be present.
WARNING
Hazards caused by improper use
If improperly used, the device can present risks to persons, animals, and material property.
• Use the device according to its designated use only.
• Do not convert or modify the device to enhance its performance without authorization.
• The device may be used only by qualified personnel (in Germany, see TRBS 1203).
Ambient temperature
−20 °C to +40 °C
Relative humidity
Up to 90 % at 20 °C
Tab. 1
Ambient conditions during operation
Ambient temperature for storage
−40 °C to +40 °C
Relative humidity
Up to 90 % at 20 °C
Tab. 2
Ambient conditions, transport and storage
Weight
6.9 kg
Dimensions L×W×H
272 × 242 × 265 mm
Supply voltage
230 V, 1-phase alternating current; 24 V DC 100–240 V
IP protection class
2X
Drive
Friction drive (4 driven wheels)
Drive wheels
4 wheels
Speed
50–1,200 mm/min
Pull force (pull force with magnet switched on)
16 kg
Welding torch work area
Horizontal 40–55°; vertical 50 mm; horizontal 50 mm
Welding torch neck diameter
16–22 mm standard model, 20–30 mm as an option
Possible weld length
Up to 4,000 mm; restricted also up to 5,000 mm
(only in consultation with
ABICOR BINZEL
)
Material/workpieces
All metal surfaces to which the magnet adheres.
Tab. 3
General device data
