abc PU00, Manual

Page: 52 / 95

50
EN
Parameter
Number
Parameter
Name
Value Range Unit
Factory
Default
P2-21
Action for DI as
External Fault Input
0
：
No Action
2 ： Stop and Warning
3
：
Jog and Warning
4
：
Run to Max Speed P5-03 and Warning
5
：
Alarm Fault and Trip to stop
6
：
Warning
7: failure and free operation and shutdown.
8: only running input is valid (output action is
consistent with option 7)
0
P2-22
DO Function
Selection -
Terminal DO1
0: No operation;
；
1: Drive ready,
2: Remote control ready
3: Drive ready/stop
4: Drive running, the drive is running;
5: Drive running/No warning, the drive is running
and no warning is present;
6: Run in current range
7: Run on reference
8: Reverse
10: Alarm
11: Alarm or warning
12: Thermal warning
13: Ready
14: Remote ready
15: Bus OK
20: Out of current range
21: Below current low
22: Above current high
23: Out of frequency range
24: Below frequency low,
25: Above frequency high
26: Out of feedback range
27: Below feedback low
28: Above feedback high
29: Out of reference range
30: Below reference low
31: Above reference high
40: Drive in Local mode;
41: Drive in Remote mode;
42: Mech. brake control,
43: External alarm
44: Unbalance warning
47
：
Counter A
48
：
Counter B
0
P2-28
Relay Output
Function Selection
- RL1
10
P2-31
Relay Output
Function Selection
- RL2
0
P2-29
Relay on Delay
Time - RL1
0.00~600.00 s 0.00
P2-30
Relay off Delay
Time - RL1
0.00~600.00 s 0.00
P2-32
Relay on Delay
Time - RL2
0.00~600.00 s 0.00
P2-33
Relay off Delay
Time - RL2
0.00~600.00 s 0.00
P2-46
Save DI Counter
Value at Power
down
0
：
Save None; 1
：
Save Counter A
2
：
Save Counter B; 3
：
Save Both Counter A and B
0
P2-47
Counter A Preset
threshold
0~65535 65535
P2-48
Counter B Preset
threshold
0~65535 65535
P2-50
Min Frequency for
Pulse Input 1
0.00~P2-51 kHz 0.00