SOTOX A™ MOBILE ANALY ZER | USER GUIDE
4 | EN
1. INTRODUC TION
1.3
SoToxa™ Mobile Analyzer specifications
ANALYZER
Dimensions (mm)
L 222 × W 88 × H 61
Weight
Approximately 680g
Detection system
Digital imaging device.
Controls
Test cartridge and collection device sensors. Test cartridge recognition using 2D barcodes for identifying cartridge type, ID, batch and
expiry date. Sensor providing feedback on angle of inclination of analyzer. Test cartridge heating with temperature control. Internal start-
up checks and process controls during testing. Quality control test cartridges.
Display
LCD colour screen 81mm
User interface
Five way navigation key, left and right soft keys, power button, reset button.
Electrical rating
15V 3A (via external PSU). The analyzer should only be charged/powered by the supplied PSU and cables. This product complies with the
Canadian standard ICES-001/NMB-001 concerning electromagnetic compatibility.
Languages
English and French (Canada)
Memory
Data storage capacity of over 10,000 tests, the last 200 results can be accessed on the analyzer by the supervisor.
SD card
SD card connectivity for firmware and test cartridge updates and export of analyzer diagnostic and test data.
USB Interface
To communicate with the Software Application Suite where applicable.
Printer
Connection to Martel MCP7810-323 printer for printing test reports.
OPERATING CONDITIONS
Temperature
5°C to 35°C* is the operational temperature for running a test.
Note: the rated safe electrical operating temperature of the analyzer is 0°C to 40°C, but tests must be run between 5°C to 35°C.
Relative humidity
10 to 90%
Storage temperature
-20°C to 45°C
Environment
Protect the analyzer from direct sunlight, humidity and dust.
POWER SUPPLY
Mains power
Input: 100-240V AC 50-60Hz 1.1A | Output: 15V DC 3A
Battery power
3.2Ah 11.1V lithium battery
Car (optional)
Input: 10 to 15V DC | Output: 15V DC 3A
PRINTER
Dimensions (inches)
L 150 × W 80 × H 50
Weight
363.5g
Controls
Power button
* Operation within the temperature range of 5°C to 35°C will be tested at 20 to 80% RH, however due to testing limitations it is not possible to accurately control humidity
below 50°F. The SoToxa™ Mobile Analyzer is operational down to 5°C at an unquantified relative humidity.
1.4
Transport and unpacking
The SoToxa™ Mobile Analyzer and its accessories are supplied in a convenient Carry Case, and all have been fully inspected and tested. Upon
receiving the SoToxa™ Mobile Test System, immediately inspect the contents of the case for any transportation damage or missing items (see
list of accessories below). If any sign of damage is found, or if any items are missing, contact Customer Service.
The case is designed to allow the analyzer and accessories to be used from within the case, however the analyzer can be removed if required.
It is recommended that the analyzer is operated and transported in the case, and is secured by the velcro straps to prevent movement when in
transit.