manualshive.com logo in svg

Abbott SoToxa Oral Fluid, User Manual

Share
Download
Abbott SoToxa Oral Fluid User Manual Download Page 23

SOTOX A™ MOBILE ANALY ZER | USER GUIDE

 22  |  EN

9. OPER ATOR M AIN MENU

9 

Operator Main Menu

The SoToxa™ Mobile Analyzer main menu screen reflects the user access levels; Operator or Supervisor and can be reached from the default 
screen by pressing the left soft key.
This section shows the menu options for the Operator in more detail (menu shown on the right below).

9.1 

View last test

Step 1:  From the Operator menu screen select the View Last Test option.
Step 2:  The Test Options screen will then be displayed. Tests are identified by a unique test ID number. This number is also printed on the results 

printout. From the Test Options screen, highlight and select View Results to see test results (this is an example test). 

Step 3:   Exit this screen to return to the Test Options screen.
Step 4:  From the Test Options screen, you can view the test details by selecting View Details and pressing OK. The screen will then display the 

following information about the selected test (this is an example test).

 

If an error has occurred during the test, the results will not be available to view so this option will not be displayed on the Test 

Options screen.

Step 5:  Exit this screen to return to the Test Options screen.

Step 1

Step 2

Step 2

Step 4

Step 4

Summary of Contents for SoToxa Oral Fluid









































Reviews:

No comments

Brands by name

Popular brands

Load more brands