m-PIMA™ ANALYSER
USER GUIDE
13
2
2 GETTING STARTED
To prevent undesired discharge of the internal battery an energy preservation
mode (EP-mode) is implemented by the manufacturer. Before starting to work
with your m-PIMA™ Analyser see the following instructions.
Setting up the m-PIMA™ Analyser
• Connect the instrument to A/C power or a compatible external energy
source as listed in “Components and optional items” (page 9) before
switching on your m-PIMA™ Analyser. When using external power sources
also refer to their respective handling instructions.
• Insert the A/C power cord into the power transformer.
• Connect the
power transformer to the power connector port located at
the back of the instrument. Please note that the power plug can only be
inserted in one particular direction. Make sure that the arrow on the flat
side of the plug is facing the main power switch (see graphic).
• Connect the power cord to the corresponding A/C power socket.
Illumination of the power supply LED indicates the connection to mains
power.
• Switch on your m-PIMA™ Analyser using the main power switch on the
back of the instrument (position ( I )).
Power connector
Power transformer
A/C power cord
plus
tag