Abbott FreeStyle Libre 2 User Manual Download Page 48

Page: 48 / 236

Step

Action

Tap the scan button

Note:

• You can either tap the blue box on the Home screen or

at the top right.

• If the Ready to Scan dialog disappears, tap the scan

button

again.

NFC is now activated and your iPhone is ready to scan the

Sensor.

Hold the top of your iPhone near the Sensor (this can be

done over clothing). Do not move your iPhone until you

hear a tone and/or feel a vibration. This completes the scan.

Note:

• If you need help, tap

HOW TO SCAN A SENSOR

to view an

in-app tutorial. You can also access this later by going to

the Main Menu and then tapping

Help

• If your Sensor is not successfully scanned, you may receive

this Scan Error: “Your scan was unsuccessful. Tap the scan

button and scan again.”

See

Troubleshooting

section for additional error messages.

Summary of Contents for FreeStyle Libre 2













































































































































































































































Search results

Summary of Contents for FreeStyle Libre 2

Reviews:

Abbott FreeStyle Libre 2, User Manual, Page: 48 / 236

Search results

Summary of Contents for FreeStyle Libre 2

Reviews: