Abbott FreeStyle Libre 2 User Manual Download Page 17

Page: 17 / 236

•

Do NOT use if Sensor Kit contents are past expiration date.

•

Do NOT use if the Reader appears to be damaged due to risk of

electric shock and/or no results.

What to know about the System:

•

The FreeStyle Libre 2 System is intended for use by a single person.

It must not be used by more than one person due to the risk of

misinterpreting glucose information.

•

FreeStyle Libre 2 app and FreeStyle Libre 2 Readers do not share data.

What to know before you Apply the Sensor:

•

The Sensor Pack and Sensor Applicator are

packaged as a set (separately from the Reader) and

have the same Sensor code. Check that the Sensor

codes match before using your Sensor Pack and

Sensor Applicator. Do not use Sensor Packs and

Sensor Applicators with different Sensor codes

together as this will result in incorrect glucose

readings.

CODE

FreeStyle Libre

Sensor Pack

Abb

ott D

iabe

tes C

are Lt

d. Rang

e Road, Witney, Oxon, OX29 0

YL, U

K D

OC3

039

1 R

ev.

XXXXXXXXX

XXX

YYYY-MM-DD

Summary of Contents for FreeStyle Libre 2













































































































































































































































Search results

Summary of Contents for FreeStyle Libre 2

Reviews:

Abbott FreeStyle Libre 2, User Manual, Page: 17 / 236

Search results

Summary of Contents for FreeStyle Libre 2

Reviews: