Home
/
Abbott
/
FreeStyle Libre 2
/
User Manual

Abbott FreeStyle Libre 2, User Manual, Page: 231 / 236

Share

216 pages before
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236

Page: 231 / 236

Abbott FreeStyle Libre 2 User Manual Download Page 231

DEFINITIONS

“Font Software” refers to the set of files released by the Copyright Holder(s) under this license and clearly marked

as such. This may include source files, build scripts and documentation.

“Reserved Font Name” refers to any names specified as such after the copyright statement(s).
“Original Version” refers to the collection of Font Software components as distributed by the Copyright Holder(s).
“Modified Version” refers to any derivative made by adding to, deleting, or substituting — in part or in

whole — any of the components of the Original Version, by changing formats or by porting the Font Software

to a new environment.

“Author” refers to any designer, engineer, programmer, technical writer or other person who contributed to the

Font Software.

PERMISSION & CONDITIONS

Permission is hereby granted, free of charge, to any person obtaining a copy of the Font Software, to use, study,

copy, merge, embed, modify, redistribute, and sell modified and unmodified copies of the Font Software, subject

to the following conditions:
1) Neither the Font Software nor any of its individual components, in Original or Modified Versions, may be sold

by itself.

2) Original or Modified Versions of the Font Software may be bundled, redistributed and/or sold with any

software, provided that each copy contains the above copyright notice and this license. These can be included

either as stand-alone text files, human-readable headers or in the appropriate machine-readable metadata

fields within text or binary files as long as those fields can be easily viewed by the user.

3) No Modified Version of the Font Software may use the Reserved Font Name(s) unless explicit written

permission is granted by the corresponding Copyright Holder. This restriction only applies to the primary font

name as presented to the users.

4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font Software shall not be used to promote,

endorse or advertise any Modified Version, except to acknowledge the contribution(s) of the Copyright

Holder(s) and the Author(s) or with their explicit written permission.

225

«
...
229
230
231
232
233
...
»

Summary of Contents for FreeStyle Libre 2













































































































































































































































Reviews:

No comments