DIGIVAL User Manual
32
The following screen is displayed:
To configure the Ethernet interface, first select the appropriate Method
(DHCP or Manual). The DHCP method causes the DIGIVAL to obtain its
network configuration from a DHCP server on the network. This is the simpler
of the two methods and is the recommended option if a DHCP server is
available. When the DHCP method is used, the remaining interface settings
do not need to be configured.
If no DHCP server is available, the interface must be configured using
the Manual method. In this case, the other interface settings must be set
individually and should be configured according to information provided by
your network administrator.
7.4.1.1 Network Interface Settings - Method
To change the Method setting, tap the Method line on the screen and the Edit
Property: Method screen is displayed:
Tap the desired Method, then tap
OK to save the new setting.
7.4.1.2 Network Interface Settings - Other Properties
To change the other interface properties (Address, Netmask, Gateway, and
Nameservers), tap the corresponding line on the screen and the Edit Property
screen is displayed. The DIGIVAL must be connected for other screens to
show.
Use the keypad to enter the desired value for the selected property. Values
should be in the format 0.0.0.0, where each '0' represents a number in the
range 0-255. Tap
OK to save the new value and return to the main Network
Settings screen.
Summary of Contents for DIGIVAL LFR-024
