DIGIVAL User Manual
11
4.3 Power up and first time login
8.
Power Up: With the power
connected, press the Power
Button on the front of the
DIGIVAL to power up and start
the DIGIVAL. The power button
lights up, and the Scan or Enter
Operator ID screen displays.
Once the instrument is running,
it may be turned off (shut down)
by pressing and holding the
Power Button for 10 seconds or
longer.
Figure 1: Power up screen
Note: The instrument is intended to be used with external power connected. A battery
with lightning symbol will appear when power is connected. When disconnected from
power, a battery symbol will appear with 3 (or less) bars, depending on remaining
charge. When battery level drops to 30%, a Warning message will appear.
To set up your system for the first time, follow the steps below.
•
Log in as admin
•
Set the date and time
•
Set the admin password
•
Create operator(s)
•
Log out
•
Log in as an operator
•
Perform a calibration check
1. Log in as "Admin"
The first user to power up the system can log in as "admin." To log in:
Scan or Enter Operator ID: Enter 'Admin' as the login name.
Password: Enter 'admin' for the password.
Summary of Contents for DIGIVAL LFR-024
