3. Remove the magnet, replace the keeper bar, and store the magnet.
3.
CAUTION: Do not use the magnet around magnetically sensitive items to avoid damaging them.
Using the EPG
Read this section for directions for use related to the EPG and EPG header. For directions for use of other
system components not covered in this document, see the clinician’s manual for the appropriate device.
NOTE: Well in advance of the surgical procedure, set up communication between the EPG and the
programmer and controller to ensure it is functional. Refer to “Setting Up Communication Between the
EPG and the Clinician Programmer or Patient Controller” (page 17) for instructions.
CAUTION: Before the EPG or associated components are used or secured to the patient, determine if a
patient may have an allergic reaction to the materials.
Compatibility Guidelines
The following table lists the trial cable and leads compatible with the EPG. For more information on these
components, refer to the applicable clinician's manual.
Table 1. Trial cable and leads compatible with the EPG
Device
Model Number
Multilead trial cable
3013
Percutaneous trial leads
3046, 3066, 3086
20
