EPG Indicator Light
The indicator light on the EPG will flash for the following reasons:
▪
When batteries are inserted into the EPG
▪
▪
When a communication session with the clinician programmer app or patient controller app is started
▪
▪
When the magnet is held for approximately 10 seconds over the EPG (signaling the EPG is ready to pair
▪
with the clinician programmer or patient controller)
NOTE: The EPG indicator light flashes faster when it is ready to pair than when batteries are inserted
or a communication session is started.
Starting and Stopping Stimulation
Use the clinician programmer app or the patient controller app to start or stop stimulation. You may also use
the magnet (Model 1210) to start or stop stimulation if Magnet Mode is programmed to On/Off or Off.
To use the magnet:
1. Take the keeper bar off the magnet.
1.
18
