Abbott Diagnostics Aeroset Customer Training Manual Download Page 282

Page: 282 / 456

MODULE 7: QUALITY CONTROL

7-38

AEROSET

Customer Training Guide

94858-103 — July 2003

3. Select one of the following export options:

4. Select one of the following sort options:

5. Select the QC report category from the following list:

•

QC Summary

•

QC Data List

NOTE:

One or both reports can be selected.

6. Select the QC level to be exported:

7. Select

<OK>

. The

Export QC Data

dialog window displays.

Figure 7.24: Export QC Data Dialog Window

Option

Description

Only Selected Assay

Only QC statistics for the assay(s) selected
on the

QC SUMMARY

screen are exported.

All Assays

QC statistics for all configured assays are
exported.

Only Selected Date
Range

Only QC statistics for the configured date
range are exported.

Option

Description

Assay

All QC statistics display for one assay before
displaying QC statistics for the next assay.

Summary of Contents for Aeroset









































































































































































































































































































































































































































































Search results

Summary of Contents for Aeroset

Reviews:

Abbott Diagnostics Aeroset, Customer Training Manual, Page: 282 / 456

Search results

Summary of Contents for Aeroset

Reviews: