Calibrating an Assay
AEROSET
®
Customer Training Guide
6-15
94858-103 — July 2003
8. When all desired assays have been selected, select
<OK>
in the
upper right-hand corner of the
SELECT ASSAYS FOR
CALIBRATION
screen. The
RUN OPTIONS
screen is displayed.
NOTE:
It is necessary to perform a full calibration on any
assay for which the configured calibrator values have been
edited. This calibration must be performed immediately
after the edits. Refer to
Calibrator/Control
Configuration
in
Section 2, Installation Procedures and
Special Requirements
of the
AEROSET System
Operations Manual
for information on calibration
configuration.
NOTE:
To run quality control after calibration, place a
checkmark (
;
;
;
;
) in the box to the left of the QC after Calib
option by touching the box. Controls run automatically
after calibration for the assays selected to calibrate. Also,
select the checkbox under the desired QC levels.
9. Select
<Save>
in the right-hand column of the
RUN OPTIONS
screen to save the calibration order. A confirmation dialog window
is displayed.
Figure 6.3:
Save Confirmation Dialog Window
10. Select
<OK>
.
11. Select
<Cancel>
on the
RUN OPTIONS
screen to exit the screen
without starting the run.
Summary of Contents for Aeroset
