Abbott Diagnostics Aeroset Customer Training Manual Download Page 274

Page: 274 / 456

MODULE 7: QUALITY CONTROL

7-30

AEROSET

Customer Training Guide

94858-103 — July 2003

4. Select

<Print>

in the right column of the screen. The

Print Options

dialog window displays.

Figure 7.16: Print Options Dialog Window

5. Select one of the following print options:

NOTE:

To print a date range, select either

<Only Selected

Assay>

<All Assays>

in addition to

<Only Selected Date

Range>

Option

Description

Only Selected Assay

Only QC statistics for the assay selected on
the

ASSAYS

QC SUMMARY

screen are

printed.

NOTE:

If multiple assays are

highlighted on the

QC SUMMARY

screen and the

Print Options

dialog

window is accessed from the

Levey-Jennings Graph

Data List

screen, only statistics for

the displayed assays are printed.

All Assays

QC statistics for all configured assays are
printed.

Only Selected Date
Range

Only QC statistics for the configured date
range are printed.

Summary of Contents for Aeroset









































































































































































































































































































































































































































































Search results

Summary of Contents for Aeroset

Reviews:

Abbott Diagnostics Aeroset, Customer Training Manual, Page: 274 / 456

Search results

Summary of Contents for Aeroset

Reviews: