manualshive.com logo in svg

Abbott Diagnostics Aeroset, Customer Training Manual, Page: 262 / 456

Share
Download
Abbott Diagnostics Aeroset Customer Training Manual Download Page 262

MODULE 7: QUALITY CONTROL

7-18

 

AEROSET

®

 Customer Training Guide

94858-103 — July 2003

The result value of a point on the 

Levey-Jennings Graph

 can be 

displayed on the 

Details

 dialog window. Also, on the 

Details

 dialog 

window, a result can be excluded from the calculation of the QC 
statistics. To display the 

Details

 dialog window for a point, perform the 

following steps:

1. Select the point for which details are desired.

2. Select 

<Details>

 on the right-hand side of the

 

Levey-Jennings Graph

 screen. The 

Details

 dialog window is 

displayed.

Figure 7.8:

Details Dialog Window

• Details let you exclude a point—will 

not actually delete the value.

• A specified date range can be selected 

to calculate and print QC Statistics for 
QC Summary, Levey-Jennings Graph, 
and QC Data List reports. The date 
range is selected on the QC Summary 
screen.

Summary of Contents for Aeroset









































































































































































































































































































































































































































































Reviews:

No comments