- 76 -
000995AG
5 - Installation
C
onnection for the AC output connector to the inverter
To avoid risks of electrical shock, all wiring operations must be carried out with the dis-
connect switch downstream of the inverter (grid side) off.
For all inverter models, connection to the electrical grid is carried out
using the AC output connector
10
.
• Remove the pre-installed protective cover on the inverter.
• Insert the corresponding part in the AC output connector
10
be-
ing careful to align the reference points (present on both connectors)
which prevent connection errors.
2
1
3
In order to maintain the inverter's level of IP protection, the corresponding part must be in-
stalled with the AC cable connected or the protective cover, on the AC output connector.
In addition, the connector must not be subject to tensile forces (examples: do not connect
weights to the AC cable, do not leave excess cable windings hanging, etc).
IP65
