62 94-1100-00002874 A0 EN│TruFit™ Power Distribution Unit
5.6.2.3
Panel Ratings screen
The selected panel’s voltage, current, and frequency ratings and CT information are shown in this screen.
These settings cannot be configured; they are set by the factory or ABB Service and are read only. The
selected panel is noted in the screen’s upper left corner.
Figure 5-41: Panel Ratings screen
5.6.2.4
Panel Parameter Reset screen
Some metering parameters for the selected panel have maximum and minimum values logged over time.
The logging of these values can be reset to start over, as shown below. The selected panel is noted in the
screen’s upper left corner.
To reset a value, click on that value, then click the blue RESET button.
Figure 5-42: Panel Parameter Reset screen
