56 94-1100-00002874 A0 EN│TruFit™ Power Distribution Unit
5.6
Setting alarm/warning limits and ratings
This section shows the PowerView configuration screens for the PDU, panel, branch and sub-feed circuits
and shows the range of adjustments that are possible using these screens.
Note:
Only ‘ADMIN’ or higher can access these screens. The changes made are not saved until you select
the “Save” option.
Use caution when making configuration changes. In some cases, the GUI
may not limit you from making unwise changes that could cause the
equipment to malfunction.
The settings pages can be configured/viewed by navigating to the panel through the settings icon (
).
Any value on a settings screen that is blue can be changed. To change a value, click on that value. A
keyboard sub-window will open, as shown in Figure 5-32. Click on the numerals or letters to enter the
new value. Click on the keyboard icon the sub-window’s lower right to close the window and set the new
value.
Figure 5-32: Edit Settings keyboard
Click
to save changes.
Click
to exit the screen without changes being implemented.
