ABB SmartTouch B/graphite Product Manual Download Page 31

Page: 31 / 368

Technical data

Product manual 2CKA001473B5343

│

Parameter setting: Programming (KNX)

ETS 6 (from ETS 5.x) and ABB DCA
SmartTouch 10 via KNX bus or micro SD card

Parameter setting (free@home)

Via SAP-S-1-84 (no SD card required)

Table 3: Technical data

5.1 Dimensional

drawings

Fig. 4:

Dimensions

All dimensions are in millimetres.

The installation height of the device is 14 mm.

The installation depth is 10 mm.

Notice

The dimensions of the associated flush-mounted installation boxes (not included
in the scope of supply) are as follows:

■

Dimension for flush-mounting (H x W x D): 156 x 238 x 60.

■

Dimension for hollow wall mounting (H x W x D): 146 x 227 x 50.

The dimensions of the surface-mounted mounting frame (not included in the
scope of supply) are as follows:

■

(H x W x D): 176 x 250 x 10

Summary of Contents for SmartTouch B/graphite

















































































































































































































































































































































































Search results

Summary of Contents for SmartTouch B/graphite

Reviews:

Related manuals for SmartTouch B/graphite

Brands by name

Popular brands

ABB SmartTouch B/graphite, Product Manual

Search results

Summary of Contents for SmartTouch B/graphite

Reviews:

Related manuals for SmartTouch B/graphite

Brands by name

Popular brands