ABB SmartTouch B/graphite Product Manual Download Page 343

Page: 343 / 368

Operation

Product manual 2CKA001473B5343

│

343

12.6

Inserting the micro SD card (SDHC)

Fig. 61: Inserting the micro SD card (SDHC)

Notice

For the transfer of data to the device via the micro SD card the power supply
must be switched on.

12.7 System

settings

Within the system settings general adjustments appropriate to the device can be made. These
are described as follows.

Fig. 62: System settings (example illustration)

The system settings are called up as follows:

1. Tap on the hamburger menu at the top left on the main operating page (homepage).
2. Then tap on the toothed wheel icon at the bottom left.

– The system settings opens.

Summary of Contents for SmartTouch B/graphite

















































































































































































































































































































































































Search results

Summary of Contents for SmartTouch B/graphite

Reviews:

Related manuals for SmartTouch B/graphite

Brands by name

Popular brands

ABB SmartTouch B/graphite, Product Manual

Search results

Summary of Contents for SmartTouch B/graphite

Reviews:

Related manuals for SmartTouch B/graphite

Brands by name

Popular brands