KNX control elements and application parameters
Application "Logical functions"
Product manual 2CKA001473B5343
│
218
10.23 Application
"Logical
functions"
10.23.1 Channel x — Application
Name of channel
:
Options: <Name>
Naming of the channel. The length of the name is limited to 30 characters.
Application
:
Options: Inactive
Logic gate
Multiplexer
Multiplier
Gate
Temperature
comparator
Status
converter
Time
function
The parameter is used to specify the logic function that is allocated to channel x.
Depending on the selection, individual parameters appear for the respective logic function.
–
Inactive
: The logic functions are not active. No additional parameters available.
–
Logic gate
: If the function is specified with AND, OR, NAND, NOR, XOR or XNOR, up to ten
input communication objects can be enabled per logic function. The size of the inputs can
be specified either with 1 bit or with 1 byte. At the receipt of a new telegram at the input,
they are switched according to the selected function. The inputs can also be individually
inverted.
Each function has an output object on which results determined from the inputs can be sent.
The size of the output object can, depending on the parameterization, be 1 bit or 1 byte. The
default value that is to be sent at a positive result can be adjusted.
The following parameters are displayed:
Number of input objects
:
Options:
Setting options from 1 - 10
The parameter is used to set the number of input objects that are to be linked in the logic
function. See the explanation above.
Notice
If the parameter is set on "1", the "logic function" parameter is specified on
"NOT".
Logic function
:
Options: AND
OR
XOR
XNOR
NAND
NOR
The parameter is used to specify the logic gate the communication objects are to be linked
with. See the explanation above.