1.5
Symbols and conventions
1.5.1
Symbols
GUID-02020343-B7F4-47D8-BBBE-142E9E53CE2D v1
The electrical warning icon indicates the presence of a hazard which could
result in electrical shock.
The warning icon indicates the presence of a hazard which could result in
personal injury.
The caution icon indicates important information or warning related to the
concept discussed in the text. It might indicate the presence of a hazard which
could result in corruption of software or damage to equipment or property.
The information icon alerts the reader of important facts and conditions.
The tip icon indicates advice on, for example, how to design your project or
how to use a certain function.
Although warning hazards are related to personal injury, it is necessary to understand that
under certain operational conditions the operation of damaged equipment may result in
degraded process performance leading to personal injury or death. Therefore, it is
recommended to comply fully with all warning and caution notices.
1.5.2
Document conventions
GUID-0F467E9F-DAFE-489F-A3C4-6D2591965E86 v1
A particular convention may not be used in this manual.
•
Abbreviations and acronyms in this manual are spelled out in the glossary. The glossary
also contains definitions of important terms.
•
Parameter names are shown in italics.
For example, the function can be enabled and disabled with the
Operation setting.
Section 1
1MRK 511 433-UEN B
Introduction
4
SAM600 Process Bus I/O System
Engineering manual
© Copyright 2017 ABB. All rights reserved
