SAM600-specific functionalities like
Indicate Modules, Get Serial Number, Set Simulation Mode
and
Reset to Factory Default are available to support the engineering, commissioning and
operational phase of the project.
Once the engineering of a SAM600 system is done, the results are written to a SAM600
system. Conversely, engineering information can be uploaded from a SAM600 system for
various purposes.
The connection between the physical SAM600 system and PCM600 is established via USB link.
1MRK 511 433-UEN B
Section 2
Engineering tool set
SAM600 Process Bus I/O System
7
Engineering manual
© Copyright 2017 ABB. All rights reserved
