2105551-001 rev. AC |
23
6.4 Changing the LCD display
The factory configuration has a default date and time display. To change the display
to preferred settings:
1. On
the
Station Setup
tab, scroll down to the LCD Display Date/Time Format
section (Figure 16).
Figure 16: LCD display date and time format
2. Select the preferred Date/Time Format (mmddyy or yymmdd).
3. Select the preferred Date Separator (slash, dash, or period).
4. Select the preferred Time Separator (colon or period).
5. Click
Send
to save all of the station settings.
7 Configuring
communications
7.1 Configuring the COMM ports
The configuration is for COMM1 and COMM 2 communication ports when
connecting one or more serial devices. These ports are software configurable to
support RS-232, RS-422, and RS-485. To configure the ports:
1. Ensure the power LED on the COMM module is on (green).
2. In PCCU, click Communications on the navigation tree. The Communications
Setup tab displays (Figure 17).
Figure 17: COMM port configuration
