7:2.5 Presentation Settings
The Presentation setting menu consists of parameters for the LCD set-up. The presenta-
tion language can be chosen among 12 different languages. The real-time clock for the
softstarter can be set in this menu.
Enter the Presentation settings
Enter the menu by selecting
Presentation Set
.
Presentation language
To set the desired presentation language on the LCD, press
Change
and
Store
the
selected language. Country codes are based on ISO 3166.
Available languages are:
Language
Abbreviation in LCD
Language
Abbreviation in LCD
English
US/UK
Italian
IT
Chinese
CN
Dutch
NL
German
DE
Portuguese
PT
Spanish
ES
Swedish
SE
French
FR
Finnish
FI
Russian
RU
Turkish
TR
Information!
In case the wrong language is selected, follow the “emergency instructions” below to
reach this parameter. (Start from the top level.)
Press left selection key twice.
Press lower navgation key three times.
Press left selection key twice.
Use the navigation keys to find the required language abbeviation.
Press left selection key to save the parameter.
LCD Auto Off
The LCD will be switched off automatically by a pre-set time between 1 - 255 minutes. If
the display has switched off, touch any of the keys to turn it on again.
Date Type
The date can be presented in three different ways. Depending on the selected type, the
following will be displayed at the top level:
Date type
Display on the LCD
ISO
Year - Month - Day
US
Month - Day - Year
CE
Day - Month - Year
Date Year
To set the year in the real time clock, press
Change
to enter the setting level. Press
Store
to save the set value.
Date Month
To set the month in the real time clock, press
Change
to enter the setting level. Press
Store
to save the set value.
Date Day
To set the day in the real time clock, press
Change
to enter the setting level. Press
Store
to save the set value.
Time Hour
To set the hours in the real time clock, press
Change
to enter the setting level. Press
Store
to save the set value.
Time Min
To set the minutes in the real time clock, press
Change
to enter the setting level. Press
Store
to save the set value.
The configuration of the presentation setting menu is now completed. It is possible to
return to the top level by pressing
Back
3 times.
Figure 32: Presentation Settings menu
Top level
Settings
Application setting
Basic settings
Functional settings
Presentation settings
Service settings
All settings
Changed settings
Reset all settings
Operation mode
Chapter 7
Settings and configuration
7.20
Low Voltage Products & Systems
1SXU 132 021 M0201
ABB nc. • 888-385-1221 • www.abb-control.com
7