CI/AHM550–EN Rev. D
3
Symbols
Symbols that appear on this product are shown below:
Product recycling and disposal (Europe only)
Restriction of Hazardous Substances (RoHS)
Specification
Mechanical data
Protection
IP54
Dimensions
Height – 480 mm (18.90 in.)
Width – 290 mm (11.41 in.) – door shut
Depth – 185 mm (7.28 in.) door closed – minimum
(excluding fixing brackets)
Weight – 4.5 kg (10 lb)
Electrical
Power supply (supplied by transmitter)
24 V DC max.
Power consumption
8 W max.
Direct current supply only.
This symbol, when noted on a product, indicates a potential hazard which could cause serious personal injury and / or death.
The user should reference this instruction manual for operation and / or safety information.
This symbol identifies a risk of chemical harm and indicates that only individuals qualified and trained to work with chemicals
should handle chemicals or perform maintenance on chemical delivery systems associated with the equipment.
This symbol indicates the need for protective eye wear.
This symbol indicates the need for protective hand wear.
Electrical equipment marked with this symbol may not be disposed of in European public disposal systems. In conformity with
European local and national regulations, European electrical equipment users must now return old or end-of-life equipment to
the manufacturer for disposal at no charge to the user.
Electrical equipment marked with this symbol may not be disposed of in European public disposal systems after 12 August
2005. To conform to European local and national regulations (EU Directive 2002/96/EC), European electrical equipment users
must now return old or end-of-life equipment to the manufacturer for disposal at no charge to the user.
ABB is committed to ensuring that the risk of any environmental damage or pollution caused by any of its products is minimized
as far as possible.
Note.
For return for recycling, please contact the equipment manufacturer or supplier for instructions on how to return end-of-life
equipment for proper disposal.
The European Union RoHS Directive and subsequent regulations introduced in member states and other countries limits the
use of six hazardous substances used in the manufacturing of electrical and electronic equipment. Currently, monitoring and
control instruments do not fall within the scope of the RoHS Directive, however ABB has taken the decision to adopt the
recommendations in the Directive as the target for all future product design and component purchasing.
