2 Installation and commissioning
2.6.5. Installation of position switches (option)
117
3HAC022033-001 Revision: E
©
Co
py
rig
h
t 200
4 - 20
08 ABB.
All r
ig
h
ts r
e
se
rv
ed
.
7. Run the remaining cable harness up
through the lower arm and:
•
secure with the
bracket, lower arm
,
as shown in the figure to the right.
•
connect the connector R2.SW3 to
the position switch of axis 3.
•
secure the cable going to the fan of
axis 3, together with the robot
cabling with a velcro strap.
xx0500002313
A. Bracket, lower arm. Also shown in
the figure
position switches and fans, axes 1-
3 on page 114
.
B. Bracket for robot cabling
C. Connector R2.SW3
D. Velcro strap
8. Secure the axis 3 fan cable with the
bracket, upper arm
.
position switches and fans, axes 1-3 on
page 114
9. Connect the connector R3.FAN3 to the
fan of axis 3. If no fan is used, strap the
cable together with the robot cabling.
xx0500002314
Action
Note
Continued
Continues on next page