3 Maintenance
3.3.2. Inspection, oil level gearbox axis 2
3HAC023082-001 Revision: E
140
©
Co
py
rig
h
t 200
4-
200
8 ABB. All righ
ts reser
v
ed.
Inspection, oil level gearbox 2
The procedure below details how to inspect the oil level in gearbox axis 2.
Action
Note
1.
WARNING!
Handling gearbox oil involves several safety
risks. Before proceeding, please observe the
safety information in section
risks during work with gearbox oil on page 41
.
2.
DANGER!
Turn off all electric power, hydraulic and
pneumatic pressure supplies to the robot!
For Foundry Prime robots: Do not turn off the air
pressure to motors and SMB.
3. Open the
oil plug, filling.
Shown in the figure
4. Measure the oil level at the oil plug, filling.
Required oil level: max. 5 mm below the oil plug
hole.
Shown in the figure
5. Add oil if required.
Art. no. is specified in
!
Filling of oil is detailed further in
section
6. Refit the oil plug, filling.
Tightening torque: 24 Nm.
7.
WARNING!
Do not mix the oil types! If wrong oil is refilled,
the gearbox must be rinsed as detailed in
section
WARNING - Mixed oils may cause
severe damage to gearbox! on page 42
!
Continued
Summary of Contents for IRB 6600 - 175/2.8 type B
Page 2: ......
Page 10: ...Table of Contents 8 3HAC023082 001 Revision E Copyright 2004 2008 ABB All rights reserved ...
Page 532: ......