HVC 450 kW E-Bus Charger Installation Guide
Revision: 1.2
COMPANY CONFIDENTIAL
Date released: 16-08-2018
Page
14
of
128
2.
Description of the product
2.1. Overview of the system
Example of a complete installation
A
Low voltage power distribution cabinet of the owner
B
Input power cables in cable conduit
C
Power Cabinet
– 450 kW (HVC 150 + 2x HVC 150S)
D
Cables between Power Cabinet and charge pole in cable conduits
E
Charge Pole with ACM and ACS
F
Bus stop space for Opportunity Charging (OPP Charge)
G
Electric hybrid and/or full electric Bus
The HVC 450 kW E-Bus Charger consists out of multiple components and it may require
additional parts depending on the project and location of installation which dictates whether
these parts are needed.
ABB offers two standard delivery system configurations:
1. Standard HVC 450 kW E-Bus Charger with pole.
2. Standard HVC 450 kW E-Bus Charger without pole.
Additional needed components can be ordered separately and are not part of the standard
delivery. See section
on Page 19.
2.1.1. Standard HVC 450 kW E-Bus Charger with pole
The following parts are provided for this system configuration:
1x HVC 150 Power Cabinet
2x HVC 150S Power Cabinet
1x Pole construction including:
1x Vertical frame, with mounted:
1x ACS Control Module (ACM)
1x Junction Box
1x Distance sensor
1x Charge state indicator light
1x Emergency push button unit
