•
Make sure that the load capacity of the grid is in accordance with the EVSE.
•
Earth the EVSE correctly. Refer to section
•
Make sure that the wiring inside the EVSE is protected from damage and cannot
get trapped when you open or close the cabinet.
•
Make sure that water cannot enter the cabinet.
•
Protect the EVSE with safety devices and measures that the local rules specify.
•
If it is necessary to remove safety devices, immediately install the safety devices
after the work.
•
Put on the correct personal protective equipment. Refer to section
2.7
Safety instructions for earthing
Preliminary requirements
•
•
Make sure that the EVSE is connected to a grounded, metal, permanent wiring
system, or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment grounding terminal or lead on the
product.
•
Make sure that the connections to the EVSE comply with all applicable local
rules.
2.8
Signs on the EVSE
Symbol
Risk type
General risk
Hazardous voltage that gives risk of electrocution
Risk of pinching or crushing of body parts
Rotating parts that can cause a risk of entrapment
Hot surface that gives risk of burn injuries
Safety
16
9AKK107992A6488-EN | 004
Summary of Contents for HP CP500
Page 103: ...Technical data 9AKK107992A6488 EN 004 103 ...
Page 104: ......
